TOA WT-D5800 A2 / EC4 Digital Wireless Receiver

รหัสสินค้า : toawtd5800

ราคา

0.00 ฿


0.00 ฿

จำนวนที่จะซื้อ
ราคารวม 0.00 ฿

สินค้าไม่เพียงพอ

สินค้าหมด

TOA WT-D5800 A2

TOA WT-D5800 EC4

WT-D5800 Digital Wireless Receiver


The WT-D5800 is a PLL-synthesizer controlled double super-heterodyne diversity receiver designed to be used with a UHF wireless system. Employing a digital reception system that is virtually immune to interference and noise, the WT-D5800 Wireless Receiver ensures stable radio signal reception. Additionally, this receiver features a host of convenient functions, such as external equipment control by way of contact outputs, and system status monitoring by way of its maintenance software, enabling highly reliable operation.


(*1) 0 dB = 1 V

Notes: The WT-D5800 cannot communicate with the TRANTEC wireless system (S4 and S5 series)

     The WT-D5800 cannot communicate with the TOA analog wireless system (WM-5325, WM-5225, etc) 

(*2) AC adapter type varies according to version, please refer to specification sheet for more information

Notes: Not supplied with the WT-D5800 (A2/EC4/-G1). For the usable power supply cord and AC adapter, contact your nearest TOA dealer.

Power Source AC mains (supplied AC adapter must be used)
Current Consumption 350 mA (13.5 V)
Frequency Range EC4/EC7 ver.: 798 - 832 MHz, EG1/GG1/-G1 ver.: 606 - 636 MHz, RH1 ver.: 576 - 606 MHz, A2 ver.: 694 - 703 MHz
Channel Selectable 160 selectable frequencies
Receiving System Double super-heterodyne
Diversity system Space diversity (digital diversity)
Mixing Output MIC/LINE (selectable): -60 dB (*1) (MIC)/-20 dB (*1) (LINE), 600 Ω phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced)
Mixing Input -20 dB (*1), 10 kΩ, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Contact Output 1 channel, no-voltage make contact output, withstand voltage: 30 V DC, control current 0.5 A max, terminal block (2pins)
Receiving Sensitivity 24 dBμV or less (Bit error rate:1E-5 or less)
Antenna Input Attenuator 0 dB/-10 dB switchable
Indicator Audio (5 steps), RF (5 steps), ANT A/B, Audio (peak), Battery alarm
Frequency Response 50 Hz - 12 kHz
Total Harmonic Distortion 0.5 % or less
Function Frequencies scanning, Feedback suppressor, Equalizer (optimizing each compatible microphone)
ID Selectable 10 patterns
Operating Temperature -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity 30 % to 85 %RH (no condensation)
Finish Resin, black
Dimensions 210 (W) x 44 (H) x 211.9 (D) mm (8.27 in x 1.73 in x 8.34 in)
Weight 730 g (1.61 lb)
Accessory AC adapter (*2) …1, Whip antenna …2, Rubber foot …4
Option Rack mounting bracket kit: MB-WT3 (for rack mounting one WT-D5800 unit), MB-WT4 (for rack mounting two WT-D5800 units)